Polyvine Decorators Varnish offers a highly durable finish that protects a wide range of surfaces against finger marks, stains, scuffing and colour fading and is for both exterior and interior use.
It is available in gloss for a shiny finish, satin for depth and a soft sheen, dead flat for a completely shine free surface.
- Also ideal as a plaster and fabric primer, wallpaper (not vinyl), a fabric stiffener, internal wood, fabric, murals and mouldings.
- Quick drying and low odour.
- Application by brush or spray with coverage up to 15-20sq/m per litre.
- Low VOC
- Touch dry within 1-4 hours
- Recoat within 1-2 hours
- Exterior & Interior rated
- UV Filter Protection
Available in several sizes.
All surfaces must be clean and free from dust, dirt, oil and contamination.
Ensure the product is well mixed but do not shake. Thinly apply 2 to 3 coats of varnish. On porous surfaces dilute the first coat with 10% water. When using dead flat finish, for a high level of protection and stain resistance, apply 2 coats of satin then 1 coat of dead flat.
Always test for clarity over dark colours. Application over emulsion paint can draw contaminants through the paint film. Should not be applied over uncured oil based products. Test for compatibility before application. Not suitable for exterior bare timber or vinyl wall covering.
Protect from extremes of temperature during storage and application.
Health, Safety and the Environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.